AZM300B-ST-SD2P Schmersal Safety Switch Interlocks

Product Details

• Wiring capacity
  50 nF
• Operation current
  150 mA
• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption with solenoid ON, average
200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+90 °C
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Storage and transport temperature, minimum
-10 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
35 mm
Length of sensor
120 mm
Width of sensor
87.5 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Tightening torque for the fixing screws, maximum
7 Nm
Tightening torque of the fixing screws, minimum
6 Nm
Type of the fixing screws
2x M6
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 2
50 N
Latching force, adjustable, position 1
25 N
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force in accordance with ISO14119 Fzh
1,150 N
Number of fail-safe digital outputs
2
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Mechanical life, minimum
1,000,000 Operations
Safety functions
Yes
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Manual release
Yes
Serial diagnostics
Yes
Latching
Yes
Actuator monitored
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
general information
Universal coding
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to unlock
Yes
Transmit power, maximum
-6 dB/m
Active principle
RFID
Frequency band RFID
125 kHz
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Coding level according to ISO 14119
Low
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Gross weight
550 g
Time to readiness, maximum
5,000 ms

AZM300B-ST-SD2P Related Documents