AZM201Z-CC-T-1P2PW-A Schmersal Safety Switches

Product Details

• Current leakage Ir
  0.5 mA
• No-load supply current I0
  50 mA
• Restistance to shock
  30 g / 11 ms
• Height of sensor
  220 mm
• Clamping force, maximum Fmax
  2,600 N
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Time to readiness, maximum
  4,000 ms
• Voltage drop Ud, maximum
  4 V
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Source
  C2
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Operating current
  50 mA
• Switching frequency, approx.
  1 Hz
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Classification ZVEI CB24I, Sink
  C1, C2
• Current consumption with solenoid ON, average
  200 mA
• Operating voltage, minimum
  20.4 VDC
• Degree of pollution to VDE 0100
  3
Overvoltage category
III
Operating voltage, maximum
26.4 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing
Storage and transport temperature, maximum
+85 °C
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
-25 °C
Width of sensor
40 mm
Length of sensor
50 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Wire cross-section, minimum
23 AWG
Wire cross-section, maximum
15 AWG
Cable section, maximum
1.5 mm²
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Actuating speed, maximum
0.2 m/s
Cable section, minimum
0.25 mm²
Terminal Connector
Spring pulley connection
Clamping force in accordance with ISO14119 Fzh
2,000 N
Latching force
30 N
Number of safety contacts
2
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Safety functions
Yes
Guard locking monitored
Yes
Manual release
Yes
Short circuit detection
Yes
Short-circuit recognition
Yes
Power to lock
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Active principle
RFID
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Coding level according to ISO 14119
Low
general information
Universal coding
Gross weight
574.7 g

AZM201Z-CC-T-1P2PW-A Related Documents