AZM201BZ-I1-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Operating current
  500 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• AS-i Parameter bits, P3
  Internal device error (FID)
• Note (AS-i Parameter bits)
  FID: periphery error
• AS-i Outputs, DO 2
  No Function
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Outputs, DO 3
  No Function
• AS-i Outputs, DO 1
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i Profile
  S-7.B.F.E
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Current consumption, maximum
  100 mA
• AS-i, IO-Code
  0x7
AS-i, ID-Code1
0xF
AS-i, ID-Code
0xB
AS-i Version
V 3.0
AS-i Specification
Safety-Slave
AS-i Operating voltage AS-i maximum
31.6 VDC
Switching frequency, maximum
1 Hz
AS-i Operating voltage, minimum
26.5 VDC
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Protection rating
III
Rated insulation voltage Ui
32 VDC
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+85 °C
Relative humidity, maximum
95 %
Relative humidity, minimum
10 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
-25 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Height of sensor
220 mm
Length of sensor
50 mm
Width of sensor
40 mm
Tightening torque for the fixing screws, maximum
8 Nm
Actuating speed, maximum
0.2 m/s
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Latching force
30 N
Clamping force, maximum Fmax
2,600 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Safety functions
Yes
Mechanical life, minimum
1,000,000 Operations
Number of actuating directions
2
Integral System Diagnostics, status
Yes
Manual release
Yes
Latching
Yes
Actuator and interlock combined monitored
Yes
Power to lock
Yes
Time to readiness, maximum
4,000 ms
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Enclosure material
Glass-fibre, reinforced thermoplastic
Reaction time, maximum
100 ms
Duration of risk, maximum
200 ms
Gross weight
540.6 g
Active principle
RFID
general information
Individual coding
Coding level according to ISO 14119
High

Related documents AZM201BZ-I1-ST-T-AS-A-P Specs