AZ 200ST2-T-1P2P Schmersal Safety Switches

Product Details

• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Current leakage Ir
  0.5 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Versions
  p-type
• Voltage drop Ud, maximum
  4 V
• Operating current
  50 mA
• Rated operating voltage, maximum
  26.4 VDC
• Rated operating current (safety outputs)
  250 mA
• Switching frequency, approx.
  1 Hz
• Rated operating voltage, minimum
  20.4 VDC
• Degree of pollution to VDE 0100
  3
• Rated insulation voltage Ui
  32 VDC
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• No-load supply current I0
  100 mA
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Relative humidity, maximum
  95 %
• Protection rating
  II
• Restistance to shock
  30 g / 11 ms
Relative humidity, minimum
30 %
Ambient temperature, maximum
+70 °C
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Note (Relative humidity)
non-condensing
Ambient temperature, minimum
-25 °C
Height of sensor
220 mm
Actuating speed, maximum
0.2 m/s
Ensured switch distance OFF Sar
30 mm
Ensured switch distance ON Sao
4 mm
Degree of protection
IP67 to EN 60529
Length of sensor
50 mm
Terminal Connector
Connector M12, 8-pole
Width of sensor
40 mm
Switch distance
6.5 mm
Latching force
30 N
Repeat accuracy R R
0.5 mm
Safety functions
Yes
Mechanical life, minimum
1,000,000 Operations
Number of safety contacts
2
Hysteresis (Switch distance), maximum
1.5 mm
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Active principle
Non-contact
Short circuit detection
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Gross weight
386 g
Time to readiness, maximum
4,000 ms
Reaction time, maximum
60 ms
Actuator monitored
Yes
Duration of risk, maximum
120 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1

Related documents AZ 200ST2-T-1P2P Specs