159518 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.58201968 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured operating distance Sao
  min.7 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; EN 60947-5-3: 2013
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.20 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• B10D
  20 x 10⁶
• Actuating range On
  min.6 mm (These values apply only in approach direction X, center offset m=0)
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Actuating range Off
  max.20 mm (These values apply only in approach direction X, center offset m=0)
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching voltage according to UL
  max.24 V AC/DC
• Switching characteristics
  Parallel
• Switching current
  max.100 mA
• Switching voltage
  max.35 V (DC)
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Method of operation
  Magnetic, reed contact
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Mechanical life
  100 x 10⁶
Cable length
5 m
Connection
Hard-wired encapsulated cable with cable end sleeves 0.25mm²
Number of NO contacts
2 NO contacts with internal fuse 100 mA each, 1 NO contact as monitoring contact
Degree of protection
IP67
Housing material
Fiber glass reinforced PPS
Weight
0,16 kg
Material
PVC
Design
B
Tightening torque
0,4 ... 0,5 Nm
Ambient temperature
-20 ... 80 °C
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)