136390 Euchner Safety Accessories

Product Details

• Weight
  8.81848 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Performance Level
  PL e
• Diagnostic Coverage (DC)
  99
• Product version number
  V1.2
• Additional feature
  Incl. cover set ID. No. 120344
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Assignment diagram
  B1
• Assured release distance Sar
  max.65 mm
• Safety class
  III
• Switching element
  2 pos. driven NC
• Safety data protocol
  CIP Safety
• Fusing
  min.1 A Slow blow
Bus data protocol
Ethernet/IP
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Transponder coding
Unicode
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Locking force FZh
2000 N
Maximum feed-in current in the connection block
max.4000 mA
Guard locking principle
Closed-circuit current principle
Current consumption
max.500 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Connection
M12 Power, A-coded (X1)
Switching frequency
0,25 Hz
Installation orientation
Door hinge DIN left
Degree of protection
IP54
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C
Mechanical life
0,1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3
Reaction time
max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel