136388 Euchner Safety Accessories

Product Details

• Weight
  8.21661874 lb
• Series
  MGB-EI
• Product Class
  Accessories
• B10D
  0,13 x 10⁶
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• Product version number
  V1.2
• Performance Level
  PL e
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Switching element
  2 pos. driven NC
• Category
  4
• Additional feature
  Incl. cover set ID. No. 120344
• Special features
  With adhesive ring
• Fusing
  min.1 A Slow blow
• Assignment diagram
  B1
• Safety data protocol
  CIP Safety
• Version
  Emergency stop illuminated
• Bus data protocol
  Ethernet/IP
• Assured release distance Sar
  max.65 mm
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Transponder coding
Unicode
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Locking force FZh
2000 N
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Guard locking principle
Closed-circuit current principle
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Rated impulse withstand voltage Uimp
0,5 kV
Connection
M12 D-coded, screened (X3)
Installation orientation
Door hinge DIN right
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Switching frequency
0,25 Hz
Degree of protection
IP54
Shock and vibration resistance
In acc. with EN 60947-5-3
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C
Mechanical life
0,1 x 10⁶