128326 Euchner Safety Accessories

Product Details

• Weight
  2.20462 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Performance Level
  PL e
• Diagnostic Coverage (DC)
  99
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Product version number
  V1.2
• Additional feature
  Incl. cover set ID. No. 120344
• Assignment diagram
  L1
• Switching element
  2 pos. driven NC
• Version
  Emergency stop illuminated
• Safety data protocol
  CIP Safety
• Special features
  With adhesive ring
• Assured release distance Sar
  max.65 mm
• Bus data protocol
  Ethernet/IP
• Fusing
  min.1 A Slow blow
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Rated insulation voltage Ui
75 V
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
Transponder coding
Unicode
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated impulse withstand voltage Uimp
0,5 kV
Maximum feed-in current in the connection block
max.4000 mA
Current consumption
max.500 mA
Weight
3,1 kg
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Guard locking principle
Closed-circuit current principle
Locking force FZh
2000 N
Connection
M12 D-coded, screened (X4)
Reaction time
max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Door hinge DIN left
Shock and vibration resistance
In acc. with EN 60947-5-3
Switching frequency
0,25 Hz