128323 Euchner Safety Accessories

Product Details

• Weight
  8.19677716 lb
• Series
  MGB-EI
• Product Class
  Accessories
• B10D
  0,13 x 10⁶
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Category
  4
• Product version number
  V1.2
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Switching element
  2 pos. driven NC
• Additional feature
  Incl. cover set ID. No. 120344
• Assignment diagram
  B1
• Safety data protocol
  CIP Safety
• Bus data protocol
  Ethernet/IP
• Assured release distance Sar
  max.65 mm
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Fusing
min.1 A Slow blow
Transponder coding
Unicode
Safety class
III
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Locking force FZh
2000 N
Rated insulation voltage Ui
75 V
Rated impulse withstand voltage Uimp
0,5 kV
Degree of contamination (external, according to EN 60947-1)
3
Current consumption
max.500 mA
Connection
M12 Power, A-coded (X1)
Guard locking principle
Closed-circuit current principle
Installation orientation
Door hinge DIN right
Mechanical life
0,1 x 10⁶
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Switching frequency
0,25 Hz
Shock and vibration resistance
In acc. with EN 60947-5-3
Degree of protection
IP54
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C