121851 Euchner Safety Accessories

Product Details

• Weight
  7.58609742 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Product version number
  V3.30.10
• Mission time
  20
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Switching element
  1NO
• Additional feature
  Incl. cover set ID. No. 120344
• Performance Level
  PL e
• Assignment diagram
  B1
• Version
  Illuminated push buttons
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Transponder coding
  Unicode
• Assured release distance Sar
  max.65 mm
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Fusing
min.1 A Slow blow
Safety class
III
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Degree of contamination (external, according to EN 60947-1)
3
Connecting cable
Profinet I/O cable, at least cat. 5e
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Current consumption
max.500 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Ambient temperature
-20 ... 55 °C
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Shock and vibration resistance
In acc. with EN 60947-5-3
Degree of protection
IP54
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Door hinge DIN right
Switching frequency
0,25 Hz
Mechanical life
0,1 x 10⁶
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
3,1 kg