121831 Euchner Safety Accessories

Product Details

• Weight
  7.5949159 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Mission time
  20
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Category
  4
• Diagnostic Coverage (DC)
  99
• Product version number
  V3.30.10
• Additional feature
  Incl. cover set ID. No. 120344
• Switching element
  1NO
• Fusing
  min.1 A Slow blow
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assignment diagram
  B1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Version
  Illuminated push buttons
• Assured release distance Sar
  max.65 mm
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Transponder coding
Unicode
Safety class
III
Rated insulation voltage Ui
75 V
Maximum feed-in current in the connection block
max.4000 mA
Current consumption
max.500 mA
Rated impulse withstand voltage Uimp
0,5 kV
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Mechanical life
0,1 x 10⁶
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Door hinge DIN right
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Ambient temperature
-20 ... 55 °C
Switching frequency
0,25 Hz
Degree of protection
IP54
Weight
3,1 kg
Shock and vibration resistance
In acc. with EN 60947-5-3