119476 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.8377556 lb
• Series
  CES-AR
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Mission time
  20
• Assured operating distance Sao
  min.10 mm
• Assured release distance Sar
  max.60 mm
• PFHD
  4.1 x 10⁻⁹
• Category
  4
• Performance Level
  PL e
• Operating distance
  15 mm
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Additional feature
  Rubber support included
• Discrepancy time
  max.10 ms
• Test-pulse interval
  min.140 ms
• Repeat accuracy R
  ≤ 10
• Test pulses
  max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Rated conditional short-circuit current
  100 A
• Utilization category acc. to EN 60947-5-2
  24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Output voltage
  0,8 x UB ... UB V DC
Off-state current Ir
max.0,25 mA
Switching current
max.50 mA
Type of output
Semiconductor output, p-switching, short circuit-proof
Turn-on time
max.400 ms
Risk time according to EN 60947-5-3
max.260 ms
Rated impulse withstand voltage Uimp
1,5 kV
Safety class
III
Current consumption
max.35 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Rated insulation voltage Ui
300 V
Fusing
0,25 ... 8 A
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Mounting distance
min.80 mm
Switching frequency
max.1 Hz
Ready delay
10 s
Connection
connection cable PUR, length 10m
Tightening torque
max.0,8 Nm
Installation orientation
Any
Degree of protection
IP67
Mounting method
Surface mounting on metal
Cable ambient temperature (static)
-25 ... 65 °C
Cable ambient temperature (dynamic)
-25 ... 65 °C
Weight
0,36 kg
Material
NBR 80 ±5 Shore
Shock and vibration resistance
In acc. with EN 60947-5-3
Dynamic bending radius
10 x cable diameter
Housing material
Plastic, PBT
Static bending radius
5 x cable diameter