119471 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.85759718 lb
• Series
  CES-AR
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.14 mm
• Assured release distance Sar
  max.40 mm
• Operating distance
  15 mm
• PFHD
  4.1 x 10⁻⁹
• Mission time
  20
• Performance Level
  PL e
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Additional feature
  Rubber support included
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Test pulses
  max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Test-pulse interval
  min.140 ms
• Utilization category acc. to EN 60947-5-2
  24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Output voltage
0,8 x UB ... UB V DC
Switching current
max.50 mA
Turn-on time
max.400 ms
Type of output
Semiconductor output, p-switching, short circuit-proof
Safety class
III
Risk time according to EN 60947-5-3
max.260 ms
Rated impulse withstand voltage Uimp
1,5 kV
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated insulation voltage Ui
300 V
Fusing
0,25 ... 8 A
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV
Current consumption
max.35 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Mounting method
Surface mounting on metal
Switching frequency
max.1 Hz
Ready delay
10 s
Connection
connection cable PUR, length 10m
Tightening torque
max.0,8 Nm
Installation orientation
Any
Degree of protection
IP67
Mounting distance
min.80 mm
Material
NBR 80 ±5 Shore
Weight
0,36 kg
Static bending radius
5 x cable diameter
Dynamic bending radius
10 x cable diameter
Cable ambient temperature (static)
-25 ... 65 °C
Housing material
Plastic, PBT
Shock and vibration resistance
In acc. with EN 60947-5-3
Cable ambient temperature (dynamic)
-25 ... 65 °C