117330 Euchner Safety Proximity Sensors

Product Details

• Weight
  1.5652802 lb
• Series
  CES-AP
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.6 mm
• Assured release distance Sar
  max.60 mm
• Operating distance
  11 mm
• Performance Level
  PL e
• Mission time
  20
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• PFHD
  4.1 x 10⁻⁹
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Additional feature
  Rubber support included
• Output voltage
  0,8 x UB ... UB V DC
• Repeat accuracy R
  ≤ 10
• Switching current
  max.50 mA
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Rated conditional short-circuit current
  100 A
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Test-pulse interval
min.100 ms
Turn-on time
max.300 ms
Type of output
p-switching, short circuit-proof
Risk time according to EN 60947-5-3
max.260 ms
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Fusing
0,25 ... 8 A
Rated impulse withstand voltage Uimp
1,5 kV
Current consumption
max.35 mA
Rated insulation voltage Ui
300 V
Connection
connection cable PUR, length 20m
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Ready delay
0,5 s
Mounting distance
min.80 mm
Switching frequency
max.1 Hz
Tightening torque
max.0,8 Nm
Installation orientation
Any
Weight
0,7 kg
Mounting method
Surface mounting on metal
Degree of protection
IP67
Static bending radius
5 x cable diameter
Housing material
Plastic, PBT
Material
NBR 80 ±5 Shore
Dynamic bending radius
10 x cable diameter
Shock and vibration resistance
In acc. with EN 60947-5-3
Cable ambient temperature (static)
-25 ... 65 °C
Cable ambient temperature (dynamic)
-25 ... 65 °C