117324 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.1873927 lb
• Series
  CES-AP
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.10 mm
• Assured release distance Sar
  max.60 mm
• Performance Level
  PL e
• Operating distance
  11 mm
• Mission time
  20
• PFHD
  4.1 x 10⁻⁹
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Additional feature
  Rubber support included
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Test-pulse interval
  min.100 ms
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Utilization category acc. to EN 60947-5-2
  24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Risk time according to EN 60947-5-3
max.260 ms
Type of output
p-switching, short circuit-proof
Output voltage
0,8 x UB ... UB V DC
Switching current
max.50 mA
Degree of contamination (external, according to EN 60947-1)
3
Safety class
III
Turn-on time
max.300 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Fusing
0,25 ... 8 A
Rated impulse withstand voltage Uimp
1,5 kV
Rated insulation voltage Ui
300 V
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Current consumption
max.35 mA
Mounting method
Surface mounting on metal
Switching frequency
max.1 Hz
Connection
PUR cable 200mm with plug connector M12x1, 5-pin
Installation orientation
Any
Mounting distance
min.80 mm
Ready delay
0,5 s
Tightening torque
max.0,8 Nm
Degree of protection
IP67
Weight
0,05 kg
Dynamic bending radius
10 x cable diameter
Static bending radius
5 x cable diameter
Housing material
Plastic, PBT
Shock and vibration resistance
In acc. with EN 60947-5-3
Material
NBR 80 ±5 Shore
Cable ambient temperature (dynamic)
-25 ... 65 °C
Cable ambient temperature (static)
-25 ... 65 °C