117101 Euchner Safety Accessories

Product Details

• Weight
  11.35158838 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Mission time
  20
• B10D
  0,13 x 10⁶
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Product version number
  V3.30.10
• Performance Level
  PL e
• Diagnostic Coverage (DC)
  99
• Switching element
  1NO
• Category
  4
• Color
  white
• Assignment diagram
  B1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Version
  Illuminated push buttons
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Multicode
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Locking force FZh
2000 N
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Rated impulse withstand voltage Uimp
0,5 kV
Current consumption
max.500 mA
Rated insulation voltage Ui
75 V
Guard locking principle
Open-circuit current principle
Switching frequency
0,25 Hz
Degree of protection
IP54
Installation orientation
Door hinge DIN left
Ambient temperature
-20 ... 55 °C
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Weight
3,1 kg
Mechanical life
0,1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel