117100 Euchner Safety Accessories

Product Details

• Weight
  7.826401 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• PFHD
  4.1 x 10⁻⁸
• Color
  white
• Category
  4
• Product version number
  V3.30.10
• Assignment diagram
  B1
• Switching element
  1NO
• B10D
  0,13 x 10⁶
• Version
  Illuminated push buttons
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Multicode
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Current consumption
max.500 mA
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Guard locking principle
Open-circuit current principle
Connection
Push-pull RJ45 (X3 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Installation orientation
Door hinge DIN right
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
3,1 kg
Degree of protection
IP54
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Ambient temperature
-20 ... 55 °C
Mechanical life
0,1 x 10⁶
Switching frequency
0,25 Hz