117098 Euchner Safety Accessories

Product Details

• Weight
  7.7823086 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Mission time
  20
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Performance Level
  PL e
• Product version number
  V3.30.10
• Switching element
  1NO
• Version
  Illuminated push buttons
• Color
  white
• Assignment diagram
  B1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Fusing
  min.1 A Slow blow
• Assured release distance Sar
  max.65 mm
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Transponder coding
Multicode
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
Connecting cable
Profinet I/O cable, at least cat. 5e
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Switching frequency
0,25 Hz
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Installation orientation
Door hinge DIN right
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C
Degree of protection
IP54
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶