117022 Euchner Safety Accessories

Product Details

• Weight
  7.8484472 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Diagnostic Coverage (DC)
  99
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  4.1 x 10⁻⁸
• Performance Level
  PL e
• Color
  white
• Category
  4
• B10D
  0,13 x 10⁶
• Switching element
  1NO
• Version
  Illuminated push buttons
• Product version number
  V3.30.11
• Special features
  Printed
• Assignment diagram
  B1
• Assured release distance Sar
  max.65 mm
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Fusing
  min.1 A Slow blow
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Multicode
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Degree of contamination (external, according to EN 60947-1)
3
Rated insulation voltage Ui
75 V
Rated impulse withstand voltage Uimp
0,5 kV
Current consumption
max.500 mA
Locking force FZh
2000 N
Connection
Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Guard locking principle
Closed-circuit current principle
Weight
3,1 kg
Shock and vibration resistance
In acc. with EN 60947-5-3
Degree of protection
IP54
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Switching frequency
0,25 Hz
Mechanical life
0,1 x 10⁶
Installation orientation
Door hinge DIN left
Ambient temperature
-20 ... 55 °C
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel