114777 Euchner Safety Locking Systems

Product Details

• Weight
  10.0107 lb
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Performance Level
  PL e
• Product version number
  V3.30.10
• Switching element
  1NO
• Color
  Green
• Slide-in label
  Inicia estação
• Version
  Illuminated push buttons
• Assignment diagram
  L2
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Fusing
  min.1 A Slow blow
• Assured release distance Sar
  max.65 mm
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Safety class
III
Transponder coding
Multicode
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Current consumption
max.500 mA
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Guard locking principle
Open-circuit current principle
Installation orientation
Door hinge DIN left
Weight
4,05 kg
Ambient temperature
-20 ... 55 °C
Degree of protection
IP54
Mechanical life
0,1 x 10⁶
Switching frequency
0,25 Hz
Reaction time
max.220 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Shock and vibration resistance
In acc. with EN 60947-5-3