111747 Euchner Electronic Components

Product Details

• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.14 mm
• Assured release distance Sar
  max.60 mm
• Operating distance
  19 mm
• Mission time
  20
• PFHD
  1.8 x 10⁻⁹
• Performance Level
  PL e
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Switching current
  1 ... 150 mA
• Output voltage
  UB-1,5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Test-pulse interval
  min.100 ms
• Type of output
  Semiconductor outputs, p-switching, short circuit-proof
• Risk time according to EN 60947-5-3
  max.260 ms
• Cable ambient temperature (dynamic)
  -5 ... 65 °C
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
1,5 kV
Safety class
III
Turn-on time
max.300 ms
Rated insulation voltage Ui
75 V
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Fusing
0,25 ... 8 A
Connection
Connection cable PUR 0.2m with plug connector M12 5-pin, pin 5 not used
Mounting distance
min.400 mm
Current consumption
max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Tightening torque
max.1 Nm
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Installation orientation
Any
Switching frequency
max.1 Hz
Ready delay
0,5 s
Mounting method
Surface mounting on metal
Dynamic bending radius
10 x cable diameter
Cable ambient temperature (static)
-25 ... 65 °C
Static bending radius
5 x cable diameter
Degree of protection
IP67
Housing material
Plastic, PBT
Shock and vibration resistance
In acc. with EN 60947-5-3
Weight
0,06 kg