111708 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.42769628 lb
• Series
  CES-AP
• Product Class
  Safety System
• Assured release distance Sar
  max.75 mm
• Switching hysteresis
  3 mm (The values apply for surface installation of the actuator on steel.)
• Assured operating distance Sao
  min.20 mm (The values apply for surface installation of the actuator on steel.)
• Mission time
  20
• Operating distance
  27 mm
• PFHD
  2.1 x 10⁻⁹ (Applying the limit value from EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), BG certifies a PFHd of max. 2.47x10^-8.)
• Repeat accuracy R
  ≤ 10
• Performance Level
  PL e
• Category
  4
• Off-state current Ir
  max.0,25 mA
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Risk time according to EN 60947-5-3
  max.260 ms
• Discrepancy time
  max.10 ms
• Test pulses
  max.0,4 ms
• Type of output
  Semiconductor outputs, p-switching, short circuit-proof
• Safety class
  III
• Output voltage
  0 ... 1 V DC
Rated conditional short-circuit current
max.100 A
Utilization category acc. to EN 60947-5-2
24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Turn-on time
max.400 ms
Switching current
1 ... 400 mA
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
1,5 kV
Mounting distance
min.40 mm
Rated insulation voltage Ui
300 V (Tested by employers' liability insurance association up to 75V.)
Fusing
0,25 ... 8 A
Current consumption
max.50 mA
Switching frequency
max.1 Hz
Installation orientation
Any
Operating voltage DC
24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Connection
M12 plug connector, 5-pin, pin 5 not used
Degree of protection
IP67
Ambient temperature
-20 ... 55 °C
Weight
0,12 kg
Shock and vibration resistance
In acc. with EN 60947-5-3
Ready delay
0,5 s
Tightening torque
max.1 Nm
Housing material
Plastic, PBT