099258 Euchner Safety Accessories

Product Details

• Weight
  0.76941238 lb
• Series
  CMS
• Product Class
  Safety System
• Assured operating distance Sao
  min.6 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.14 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Number of switching cycles
  max.70000 1/Jahr
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• PFHD
  2.5 x 10⁻⁸ (This value is dependent on the number of switching cycles and the switching current.)
• Mission time
  20 y (This value is dependent on the number of switching cycles and the switching current.)
• Performance Level
  PL e (This value is dependent on the number of switching cycles and the switching current.)
• Category
  4 (This value is dependent on the number of switching cycles and the switching current.)
• In compliance with
  EN ISO 13849-1: 2015; EN ISO 13849-2:2012; EN 50178: 1997; EN 60204-1: 2006/A1: 2009; EN ISO 13850: 2015; EN 14119: 2013; EN 6100-2-6: 2005; EN 6100-6-3: 2007/A1: 2011; EN 60947-5-3: 2013
• Risk time according to EN 60947-5-3
  max.20 ms
• Breaking capacity (VA)
  max.720 VA
• Switching load
  Input: 24V AC/DC ; output: 30V AC, 24V DC
• Utilization category acc. to EN 60947-5-1
  0.9A , 240V and 0.9A , 24V (Max. switching current per contact)
• Switching current
  10 ... 3000 mA
• Switching voltage
  max.240 V
• Type of output
  Relay contacts, floating (2 NO contact pairs)
• LED indicator
  1 indicator LED Power, 2 output LEDs and 6 status indicators for the read heads
Connection cross-section
0,14 ... 2,5 mm²
Degree of contamination (external, according to EN 60947-1)
2
Rated insulation voltage Ui
250 V
Current consumption
10 ... 120 mA
Fusing
0,75 A Automatically resetting fuse PTC
Operating voltage
24 V -10% ... +10% (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Number of monitoring outputs
6
Number of auxiliary contacts
1
Number of safety contacts
2
Housing material
Polyamide PA6.6
Mounting method
Mounting rail 35mm according to DIN EN 60715 TH35
Connection
Connection terminals
Mechanical life
10 x 10⁶
Ambient temperature
0 ... 55 °C
Degree of protection
Terminals IP20 / housing IP40
Weight
0,3 kg