099182 Euchner Safety Accessories

Product Details

• Weight
  0.4960395 lb
• Series
  CMS
• Product Class
  Safety System
• Assured release distance Sar
  max.31 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Assured operating distance Sao
  min.6 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Mission time
  20 y (This value is dependent on the number of switching cycles and the switching current.)
• Number of switching cycles
  70000 1/Jahr
• PFHD
  1.0 x 10⁻⁷ (This value is dependent on the number of switching cycles and the switching current. This value applies to cables laid with protection. The following applies if cables are laid without protection and more than one door must be opened frequent
• Category
  3 (This value is dependent on the number of switching cycles and the switching current.)
• In compliance with
  EN ISO 13849-1: 2015; EN ISO 13849-2:2012; EN 50178: 1997; EN 60204-1: 2006/A1: 2009; EN ISO 13850: 2015; EN 14119:2013; EN 6100-6-2: 2005; EN 6100-6-3: 2007/A1: 2011; EN 60947-5-3: 2013
• Performance Level
  PL d (This value is dependent on the number of switching cycles and the switching current. This value applies to cables laid with protection. The following applies if cables are laid without protection and more than one door must be opened frequently or
• Risk time according to EN 60947-5-3
  max.20 ms
• Switching load
  Input: 24V AC/DC ; output: 30V AC, 24V DC
• Breaking capacity (VA)
  max.720 VA
• Utilization category acc. to EN 60947-5-1
  0.9A , 240V and 0.9A , 24V (Max. switching current per contact)
• Switching current
  10 ... 3000 mA
• Degree of contamination (external, according to EN 60947-1)
  2
• Connection cross-section
  0,14 ... 2,5 mm²
• Current consumption
  10 ... 110 mA
Operating voltage
24 V -10% ... +10% V (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Fusing
0,75 A Automatically resetting fuse PTC
Rated insulation voltage Ui
250 V
LED indicator
1 indicator LED Power (UB) and 2 status indicators for the read heads (K1/K2)
Type of output
Relay contacts, floating (2 NO contact pairs)
Switching voltage
max.240 V
Number of auxiliary contacts
1
Degree of protection
Terminals IP20 / housing IP40
Mechanical life
10 x 10⁶
Number of safety contacts
2
Housing material
Polyamide PA6.6
Ambient temperature
0 ... 55 °C
Connection
Connection terminals
Mounting method
Mounting rail 35mm according to DIN EN 60715 TH35
Weight
0,22 kg