093559 Euchner Safety Switches

Product Details

• Weight
  2.17595994 lb
• Series
  TX
• Product Class
  Safety switch
• B10D
  6 x 10⁶
• Overtravel
  1 mm
• PFHD
  Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
• LED indicator
  Operating voltage corresponds to the solenoid voltage (2 LEDs; green, red)
• Connection rating
  8 W (At the instant switched on 48W)
• Performance Level
  Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
• Category
  Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
• Switching current
  1 mA
• Switching voltage
  12 V
• Solenoid duty cycle
  100 %
• Rated impulse withstand voltage Uimp
  1,5 kV
• Short circuit protection according to IEC 60269-1
  4A gG (>70°C => 2A gG)
• Actuating force
  35 N
• Rated insulation voltage Ui
  50 V
• Thermal rated current Ith
  4 A (> 70 °C => 2 A)
• Solenoid operating voltage
  24 V -15% ... +10%
• Utilization category acc. to EN 60947-5-1
  4A 24V (> 70 °C => 2 A)
Extraction force
35 N
Insertion depth
32 mm
Retention force
50 N (Unlocking under load)
Guard locking principle
Closed-circuit current principle (Unlocking under load)
Locking force FZh
1300 N
Locking force Fmax
1700 N
Connection
Plug connector RC18 (18-pin + PE)
Actuation frequency
max.1200 1/h
Approach speed
max.20 m/min
Number of guard lock monitoring positively driven contacts
2
Number of guard lock monitoring NO contacts
1
Switching principle
Slow-action switching contact
Installation orientation
Any
Contact material
Silver alloy, gold flashed
Weight
0,8 kg
Degree of protection
IP65
Number of door position NC contacts
1 (> 70 °C => 2 A)
Mechanical life
1 x 10⁶
Housing material
Die-cast alloy, cathodically dipped
Ambient temperature
-20 ... 80 °C