091875 Euchner Safety Accessories

Weight0.29100984 lb

Center offset-

Data interface-

Resistance-

Read distance-

Input voltage-

Connection cross-section-

Type of output-

Switching current-

Number of read heads-

Connection-

Current consumption-

Ambient temperature-

Operating voltage DC-

Mounting method-

LED indicator-

Housing material-

Switching voltage-

SeriesCES-AR

Product ClassSafety System

Additional feature-

Data interface-

Utilization category acc. to EN 60947-5-1-

Current consumption-

Utilization category acc. to EN 60947-5-2-

Operating voltage DC-

Connection-

Ambient temperature-

Connection cross-section-

Switching current-

Mounting method-

LED indicator-

Switching voltage-

Number of read heads-

Housing material-

Switching hysteresismin.1 mm

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

PFHD1.9 x 10⁻⁹

Operating distance19 mm

Mission time20

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)

Rated conditional short-circuit current100 A

Test pulsesmax.1 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Test-pulse intervalmin.140 ms

Output voltage0,8 x UB ... UB V DC

Switching currentmax.50 mA

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Type of outputp-switching, short circuit-proof

Fusing0,25 ... 8 A

Rated impulse withstand voltage Uimp1,5 kV

Rated insulation voltage Ui75 V

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Tightening torquemax.1 Nm

Current consumptionmax.50 mA (Without taking into account the load currents on the monitoring output and the safety outputs)

Installation orientationAny

Mounting distancemin.120 mm

Operating voltage DC24 V DC 15% ... 15% Regulated, residual ripple < 5 %

ConnectionConnection cable PUR, length 1m with plug connector M12 8-pin

Switching frequencymax.1 Hz

Ready delay10 s

Cable ambient temperature (dynamic)-25 ... 65 °C

Degree of protectionIP67

Mounting methodSurface mounting on metal

Static bending radius5 x cable diameter

Weight0,09 kg

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Housing materialPlastic, PBT

Dynamic bending radius10 x cable diameter

Weight0.46305 lb

Center offset-2,5 ... 2,5 mm (These values apply for the surface installation of the read head and the data carrier.)

Data interface4 bit binary coded + strobe

Resistance4,5 kΩ For inputs (Reset,Skip)

Read distance0 ... 3 ... 6,5 mm (These values apply for the surface installation of the read head and the data carrier.)

Input voltage0 ... 2 V DC Low signal (Reset,Skip)

Connection cross-section0,14 ... 2,5 mm²

Type of outputPush-Pull

Switching current- 30 ... +30 mA

Number of read headsmax.1

ConnectionPlug-in screw terminal

Current consumption65 mA max.100 mA

Ambient temperature0 ... 55 °C

Operating voltage DC20 ... 24 ... 28 V DC (For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used.)

Mounting methodMounting rail 35mm according to DIN EN 60715 TH35

LED indicatorACTIVE LED data carrier active

Housing materialPA6.6 gray

Switching voltageUb-3 ... Ub V (High signal (A,B,C,D,Strobe))

Series-

Product Class-

Additional feature-

Data interface-

Utilization category acc. to EN 60947-5-1-

Current consumption-

Utilization category acc. to EN 60947-5-2-

Operating voltage DC-

Connection-

Ambient temperature-

Connection cross-section-

Switching current-

Mounting method-

LED indicator-

Switching voltage-

Number of read heads-

Housing material-

Switching hysteresis-

Assured operating distance Sao-

Assured release distance Sar-

PFHD-

Operating distance-

Mission time-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Repeat accuracy R-

Discrepancy time-

Off-state current Ir-

Utilization category acc. to EN 60947-5-2-

Rated conditional short-circuit current-

Test pulses-

Test-pulse interval-

Output voltage-

Switching current-

Turn-on time-

Risk time according to EN 60947-5-3-

Type of output-

Fusing-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Degree of contamination (external, according to EN 60947-1)-

Safety class-

EMC protection requirements-

Extension of risk time according to EN 60947-5-3 per device-

Tightening torque-

Current consumption-

Installation orientation-

Mounting distance-

Operating voltage DC-

Connection-

Switching frequency-

Ready delay-

Cable ambient temperature (dynamic)-

Degree of protection-

Mounting method-

Static bending radius-

Weight-

Shock and vibration resistance-

Cable ambient temperature (static)-

Housing material-

Dynamic bending radius-

Weight0.46517482 lb

Center offset-

Data interface-

Resistance-

Read distance-

Input voltage-

Connection cross-section-

Type of output-

Switching current-

Number of read heads-

Connection-

Current consumption-

Ambient temperature-

Operating voltage DC-

Mounting method-

LED indicator-

Housing material-

Switching voltage-

SeriesEKS Light

Product ClassElectronic-Key-System

Additional feature35 Resistance in switched-on state in Ohm

Data interface4-bit parallel plus strobe, binary coded via High/Low level

Utilization category acc. to EN 60947-5-124V 50mA

Current consumptionmax.70 mA

Utilization category acc. to EN 60947-5-224V 50mA

Operating voltage DC9 ... 24 ... 28 V DC (For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used.)

ConnectionPlug-in screw terminal

Ambient temperature0 ... 55 °C

Connection cross-section0,14 ... 2,5 mm²

Switching current1 ... 10 ... 50 mA High signal

Mounting methodMounting rail 35mm according to DIN EN 60715 TH35

LED indicatorOperational

Switching voltageU_B-2 ... U_B V (High signal)

Number of read headsmax.1

Housing materialPA6.6 gray

Switching hysteresis-

Assured operating distance Sao-

Assured release distance Sar-

PFHD-

Operating distance-

Mission time-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Repeat accuracy R-

Discrepancy time-

Off-state current Ir-

Utilization category acc. to EN 60947-5-2-

Rated conditional short-circuit current-

Test pulses-

Test-pulse interval-

Output voltage-

Switching current-

Turn-on time-

Risk time according to EN 60947-5-3-

Type of output-

Fusing-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Degree of contamination (external, according to EN 60947-1)-

Safety class-

EMC protection requirements-

Extension of risk time according to EN 60947-5-3 per device-

Tightening torque-

Current consumption-

Installation orientation-

Mounting distance-

Operating voltage DC-

Connection-

Switching frequency-

Ready delay-

Cable ambient temperature (dynamic)-

Degree of protection-

Mounting method-

Static bending radius-

Weight-

Shock and vibration resistance-

Cable ambient temperature (static)-

Housing material-

Dynamic bending radius-

Weight0.29100984 lb

Center offset-

Data interface-

Resistance-

Read distance-

Input voltage-

Connection cross-section-

Type of output-

Switching current-

Number of read heads-

Connection-

Current consumption-

Ambient temperature-

Operating voltage DC-

Mounting method-

LED indicator-

Housing material-

Switching voltage-

SeriesCES-AR

Product ClassSafety System

Additional feature-

Data interface-

Utilization category acc. to EN 60947-5-1-

Current consumption-

Utilization category acc. to EN 60947-5-2-

Operating voltage DC-

Connection-

Ambient temperature-

Connection cross-section-

Switching current-

Mounting method-

LED indicator-

Switching voltage-

Number of read heads-

Housing material-

Switching hysteresismin.1 mm

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

PFHD1.9 x 10⁻⁹

Operating distance19 mm

Mission time20

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)

Rated conditional short-circuit current100 A

Test pulsesmax.1 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)

Test-pulse intervalmin.140 ms

Output voltage0,8 x UB ... UB V DC

Switching currentmax.50 mA

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Type of outputp-switching, short circuit-proof

Fusing0,25 ... 8 A

Rated impulse withstand voltage Uimp1,5 kV

Rated insulation voltage Ui75 V

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-3

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Tightening torquemax.1 Nm

Current consumptionmax.50 mA (Without taking into account the load currents on the monitoring output and the safety outputs)

Installation orientationAny

Mounting distancemin.120 mm

Operating voltage DC24 V DC 15% ... 15% Regulated, residual ripple < 5 %

ConnectionConnection cable PUR, length 1m with plug connector M12 8-pin

Switching frequencymax.1 Hz

Ready delay10 s

Cable ambient temperature (dynamic)-25 ... 65 °C

Degree of protectionIP67

Mounting methodSurface mounting on metal

Static bending radius5 x cable diameter

Weight0,09 kg

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Housing materialPlastic, PBT

Dynamic bending radius10 x cable diameter

Weight0.46305 lb

Center offset-2,5 ... 2,5 mm (These values apply for the surface installation of the read head and the data carrier.)

Data interface4 bit binary coded + strobe

Resistance4,5 kΩ For inputs (Reset,Skip)

Read distance0 ... 3 ... 6,5 mm (These values apply for the surface installation of the read head and the data carrier.)

Input voltage0 ... 2 V DC Low signal (Reset,Skip)

Connection cross-section0,14 ... 2,5 mm²

Type of outputPush-Pull

Switching current- 30 ... +30 mA

Number of read headsmax.1

ConnectionPlug-in screw terminal

Current consumption65 mA max.100 mA

Ambient temperature0 ... 55 °C

Operating voltage DC20 ... 24 ... 28 V DC (For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used.)

Mounting methodMounting rail 35mm according to DIN EN 60715 TH35

LED indicatorACTIVE LED data carrier active

Housing materialPA6.6 gray

Switching voltageUb-3 ... Ub V (High signal (A,B,C,D,Strobe))

Series-

Product Class-

Additional feature-

Data interface-

Utilization category acc. to EN 60947-5-1-

Current consumption-

Utilization category acc. to EN 60947-5-2-

Operating voltage DC-

Connection-

Ambient temperature-

Connection cross-section-

Switching current-

Mounting method-

LED indicator-

Switching voltage-

Number of read heads-

Housing material-

Switching hysteresis-

Assured operating distance Sao-

Assured release distance Sar-

PFHD-

Operating distance-

Mission time-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Repeat accuracy R-

Discrepancy time-

Off-state current Ir-

Utilization category acc. to EN 60947-5-2-

Rated conditional short-circuit current-

Test pulses-

Test-pulse interval-

Output voltage-

Switching current-

Turn-on time-

Risk time according to EN 60947-5-3-

Type of output-

Fusing-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Degree of contamination (external, according to EN 60947-1)-

Safety class-

EMC protection requirements-

Extension of risk time according to EN 60947-5-3 per device-

Tightening torque-

Current consumption-

Installation orientation-

Mounting distance-

Operating voltage DC-

Connection-

Switching frequency-

Ready delay-

Cable ambient temperature (dynamic)-

Degree of protection-

Mounting method-

Static bending radius-

Weight-

Shock and vibration resistance-

Cable ambient temperature (static)-

Housing material-

Dynamic bending radius-