091083 Euchner Limit Switches

Product Details

• Weight
  0.332955 lb
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  50 V
• Short circuit protection according to IEC 60269-1
  2A gG
• Additional information
  Housing without earth conductor! (All the electrical connections must either be isolated from the mains supply by a safety transformer according IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
• Actuating force
  min.15 N
• Utilization category acc. to EN 60947-5-1
  2A 30V
• Switching current
  min.10 mA
• Operating point accuracy
  ± 0.05 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 552 has been run-in with approx. 2000 operating cycles.)
• Roller diameter
  5 mm
• Actuating element
  Roller plunger (Plain bearing)
• Approach speed
  0,01 ... 50 m/min
• Number of changeover contacts
  2
• Number of switching elements
  2
• Connection
  1 x plug connector M12 (4-pin, not adjustable. Only for straight mating connectors. Mounted on left.)
• Installation orientation
  Any
• Plunger spacing
  8 mm
• Contact material
  Pure silver (Ag)
• Ambient temperature
  -5 ... 80 °C
• Mechanical life
  10 x 10⁶ (Switching element)
Design
Upright
Weight
0,14 kg
Switching principle
Snap-action switching contact
Degree of protection
IP67 (Only screwed tight with the related mating connector.)
Housing material
Die-cast aluminum, anodized