091059 Euchner Limit Switches

Product Details

• Weight
  0.52038 lb
• Additional information
  Exterior diaphragm = AM (The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Switching current
  10 mA
• Rated impulse withstand voltage Uimp
  2,5 kV
• Connection cross-section
  0,34 ... 1,5 mm²
• Rated insulation voltage Ui
  250 V
• Number of NO contacts
  1
• Short circuit protection according to IEC 60269-1
  8A gG
• Number of switching elements
  1
• Thermal rated current Ith
  8 A
• Approach speed
  0,01 ... 10 m/min
• Connection
  M16 x 1.5
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Operating point accuracy
  ± 0.01 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Actuating force
  min.20 N
• Contact bounce time
  < 3ms
• Housing material
  Anodized die-cast alloy
• Number of NC contacts
  1
• Actuating element
  Ball plunger
• Installation orientation
  Any
Ambient temperature
-5 ... 80 °C
Mechanical life
30 x 10⁶
Contact closing time
< 4ms
Switching principle
Snap-action switching contact
Weight
0,25 kg
Degree of protection
IP67
Design
Housing according to DIN 43693
Contact material
Silver alloy, gold flashed