088416 Euchner Limit Switches

Product Details

• Weight
  0.941535 lb
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• LED indicator
  Yes
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Switching hysteresis
  max.0,5 mm
• Rated operating distance Sn
  5 mm
• Repeat accuracy R
  max.5 %
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• EMC protection requirements
  EN IEC 60947-5-2
• Voltage drop Ud
  max.2,5 V
• Off-state current Ir
  max.0,001 mA
• Reverse polarity protection
  Yes
• Type of output
  PNP
• Number of NC contacts/NO contacts
  3
• No-load current I0
  max.15 mA
• Residual ripple
  max.10 %
• Rated insulation voltage Ui
  60 V
• Operating voltage
  10 ... 55 V
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Short circuit and overload protection, pulsed
  Yes
Rated operating current Ie
250 mA
Material
PBT
Number of switching elements
3
Switching principle
NO + NC
Connection
M20 x 1.5
Weight
0,5 kg
Proximity switch spacing
16 mm
Degree of protection
IP67
Ambient temperature
-25 ... 70 °C
Design
Upright
Switching frequency
max.500 Hz
Housing material
Die-cast aluminum