088423 Euchner Limit Switches

Product Details

• Weight
  2.27115 lb
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Switching hysteresis
  max.0,5 mm
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Rated operating distance Sn
  5 mm
• Repeat accuracy R
  max.5 %
• LED indicator
  Yes
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Off-state current Ir
  max.0,001 mA
• Voltage drop Ud
  max.2,5 V
• No-load current I0
  max.15 mA
• Type of output
  PNP
• Residual ripple
  max.10 %
• Reverse polarity protection
  Yes
• Rated insulation voltage Ui
  60 V
• EMC protection requirements
  EN IEC 60947-5-2
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Rated operating current Ie
  250 mA
• Connection
  M25 x 1.5
• Short circuit and overload protection, pulsed
  Yes
Number of NC contacts/NO contacts
6
Number of switching elements
6
Operating voltage
10 ... 55 V
Switching frequency
max.500 Hz
Ambient temperature
-25 ... 70 °C
Degree of protection
IP67
Switching principle
NO + NC
Housing material
Die-cast aluminum
Material
PBT
Weight
1,2 kg Connection terminals
Proximity switch spacing
16 mm
Design
Upright, according to DIN 43697