087131 Euchner Limit Switches

Product Details

• Weight
  1.97127 lb
• Display module
  60 V 12 ... 60 V LED
• Additional feature
  (Exterior diaphragm = AM. The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Connection cross-section
  0,34 ... 1,5 mm²
• Switching current
  min.10 mA
• Rated impulse withstand voltage Uimp
  2,5 kV
• Short circuit protection according to IEC 60269-1
  8A gG
• Rated insulation voltage Ui
  250 V
• Actuating force
  min.20 N
• Thermal rated current Ith
  8 A
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Approach speed
  0,01 ... 20 m/min
• Actuating element
  Chisel plunger (Operating point accuracy ± 0.002. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Connection
  M25 x 1.5
• Mechanical life
  30 x 10⁶
• Degree of protection
  IP67
• Ambient temperature
  -5 ... 80 °C
• Weight
  1 kg
• Housing material
  Die-cast aluminum, anodized
• Number of NO contacts
  4
Contact material
Silver alloy, gold flashed
Number of NC contacts
4
Number of switching elements
4
Installation orientation
Any
Plunger spacing
12 mm
Switching principle
Snap-action switching contact (Contact closing time < 4 ms contact bounce time < 3 ms)
Design
Upright, according to DIN 43697