087107 Euchner Limit Switches

Product Details

• Weight
  1.57878 lb
• B10D
  2 x 10⁶
• Rated impulse withstand voltage Uimp
  2,5 kV
• Display module
  60 V 12 ... 60 V LED
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Rated insulation voltage Ui
  250 V
• Switching current
  min.5 mA (Applies for station 1 with switching element ES514)
• Connection cross-section
  0,34 ... 1,5 mm²
• Short circuit protection according to IEC 60269-1
  6A gG (Applies for station 1 with switching element ES514)
• Thermal rated current Ith
  8 A
• Utilization category acc. to EN 60947-5-1
  2.5A 230V (Applies for station 1 with switching element ES514)
• Actuating element
  Chisel plunger
• Actuating force
  min.30 N
• Approach speed
  0,01 ... 40 m/min
• Connection
  M25 x 1.5
• Number of NO contacts
  2
• Number of switching elements
  2
• Number of positively driven contacts
  1
• Number of NC contacts
  1
• Installation orientation
  Any
Housing material
Sand-cast aluminum, anodized
Weight
0,3 kg
Switching principle
Snap-action switching contact (Contact closing time < 4 ms, contact bounce time < 3 ms, applies from station 2 with switching element ES502E)
Ambient temperature
-5 ... 80 °C
Contact material
Silver alloy, gold flashed
Degree of protection
IP67
Mechanical life
1 x 10⁶
Plunger spacing
12 mm
Design
Upright, according to DIN 43697