086029 Euchner Limit Switches

Product Details

• Weight
  1.682415 lb
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Rated operating distance Sn
  5 mm
• Switching hysteresis
  max.0,5 mm
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Repeat accuracy R
  max.5 %
• No-load current I0
  max.15 mA
• LED indicator
  Yes
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Voltage drop Ud
  max.2,5 V
• Off-state current Ir
  max.0,001 mA
• Reverse polarity protection
  Yes
• EMC protection requirements
  EN IEC 60947-5-2
• Type of output
  PNP
• Residual ripple
  max.10 %
• Short circuit and overload protection, pulsed
  Yes
• Rated insulation voltage Ui
  60 V
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Rated operating current Ie
  250 mA
• Number of NC contacts/NO contacts
  3
Operating voltage
10 ... 55 V
Connection
M25 x 1.5
Number of switching elements
3
Design
Upright, according to DIN 43697
Ambient temperature
-25 ... 70 °C
Proximity switch spacing
16 mm
Weight
0,95 kg
Material
PBT
Switching frequency
max.500 Hz
Housing material
Die-cast aluminum
Degree of protection
IP67
Switching principle
NO + NC