086028 Euchner Limit Switches

Product Details

• Weight
  1.457505 lb
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Rated operating distance Sn
  5 mm
• Switching hysteresis
  max.0,5 mm
• Off-state current Ir
  max.0,001 mA
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Voltage drop Ud
  max.2,5 V
• LED indicator
  Yes
• Repeat accuracy R
  max.5 %
• No-load current I0
  max.15 mA
• Type of output
  PNP
• EMC protection requirements
  EN IEC 60947-5-2
• Reverse polarity protection
  Yes
• Residual ripple
  max.10 %
• Rated insulation voltage Ui
  60 V
• Operating voltage
  10 ... 55 V
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Short circuit and overload protection, pulsed
  Yes
• Rated operating current Ie
  250 mA
Connection
M25 x 1.5
Weight
0,85 kg Connection terminals
Switching principle
NO + NC
Switching frequency
max.500 Hz
Number of switching elements
2
Number of NC contacts/NO contacts
2
Material
PBT
Degree of protection
IP67
Ambient temperature
-25 ... 70 °C
Design
Upright, according to DIN 43697
Proximity switch spacing
16 mm
Housing material
Die-cast aluminum