805-116 WAGO Industrial Automation Components

WAGO 805-116 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), with a rated impulse voltage of 4kV across these categories. The rated current is 17.5A according to IEC/EN standards, and it has UL 1059 approval with rated voltages of 300V, 150V, and 300V for Use Groups B, C, and D respectively, each with a rated current of 10A. This connector has 16 connection points, supports a single connection type with push-in CAGE CLAMP technology, and is designed for a single level with one test slot. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules. The strip length for connections is 9 to 10mm, and the conductor connection direction to PCB is 0°. It has a pole number of 16, pin spacing of 3.5mm, and dimensions of 57.5mm in width, 13.7mm in height, 13.6mm in depth, with a height from the surface of 10.5mm. The solder pin length is 3.2mm, and it features a drilled hole diameter with a tolerance of 1.1 (+0.1)mm. The PCB contact is THT with a staggered solder pin arrangement and one solder pin per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It weighs 7.2g, has a fire load of 0.132MJ, and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemption, packaged in boxes of 80 (20 pcs per SPU), and has a GTIN of 4045454731649 with a customs tariff number of 85369010000. The product is manufactured in Poland.