741-911 WAGO Industrial Automation Components

WAGO 741-911 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 250V for categories III/3 and III/2, and a nominal voltage of 500V for category II/2, all with a rated impulse and surge voltage of 4kV. The rated current is 16A according to IEC/EN standards. UL and CSA approvals are included, with rated voltages of 300V and rated currents of 10A for UL (Use Group B and D) and 16A for CSA (Use Group B), with the same voltage but 10A current for CSA (Use Group D). It has a single connection point, with a total number of potentials being 1, and utilizes CAGE CLAMP connection technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1.5mm2. The strip length for connections is between 5 and 6mm (0.2 to 0.24 inches), and the conductor connection direction to PCB is 0°. It is designed with a pole number of 1, pin spacing of 5.08mm (0.2 inches), and dimensions that include a width of 5.08mm, height of 22.5mm (0.886 inches), depth of 12.8mm (0.504 inches), with the height from the surface being 18.5mm (0.728 inches). The solder pin length is 4mm, with dimensions of 0.7 x 0.7mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is orange, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) for the contact material, tin-plated. It has a fire load of 0.026MJ and weighs 1.3g. The operating temperature range is between -60 and +105°C. It is RoHS compliant without exemption, packaged in boxes of 600 pieces (100 pieces per SPU), with a country of origin of CH, GTIN 4044918678001, and a customs tariff number of 85369010000.