735-303 WAGO Industrial Automation Components

WAGO 735-303 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 320V for overvoltage category III/2 and 630V for category II/2, with a rated impulse voltage of 4kV across both categories. The rated current is 10A. For UL ratings, it has a rated voltage of 300V and a rated current of 10A for both Use Groups B and D, with similar ratings under CSA for the same groups. This connector has 3 connection points, supports a single connection type across one level, and utilizes PUSH WIRE technology with push-button actuation. It accommodates solid conductors ranging from 0.5 to 1.5mm2 (20 to 16 AWG), and fine-stranded conductors, both with and without insulated ferrules, from 0.5 to 1mm2. The strip length for connection is between 8 and 9mm, and the conductor connection direction to the PCB is at 90 degrees. It has a pole number of 3, pin spacing of 5mm, and dimensions of 15mm in width, 19.4mm in height, 10.8mm in depth, with a height from the surface of 15.9mm. The solder pin length is 3.5mm, with dimensions of 0.4 x 0.9mm, and it requires a drilled hole diameter of 1 (+0.1)mm for installation. It features a THT PCB contact with an in-line solder pin arrangement and two solder pins per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It has a fire load of 0.04MJ and weighs 2.5g. Designed to operate within a temperature range of -60 to +105°C, it complies with RoHS without exemptions. The product belongs to group 4 (Printed Circuit Connectors), is packaged in boxes of 320 pieces, and has a GTIN of 4044918792967.