2606-1360 WAGO Industrial Automation Components

WAGO 2606-1360 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 800V (III/3) and 1000V (II/2, III/2), with rated impulse voltages of 8kV for both overvoltage categories III/2 and III/3. The rated current is specified at 41A according to IEC/EN standards. Under UL 1059 approvals, it has a rated voltage of 600V and a rated current of 42A for both Use Groups B and C. CSA approvals indicate a rated voltage of 600V and a rated current of 31A for Use Groups B and C. This part includes 10 connection points, supports a single connection type with one level, and utilizes Push-in CAGE CLAMP technology with lever actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 10mm2 (24 to 8 AWG), including various ferrule types. The strip length for connections is between 11 and 13mm, with a conductor connection direction to PCB of 0°. It has a pin spacing of 12.5mm, dimensions of 121.5mm in width, 28mm in height, and a height from the surface of 24mm. The solder pin length is 4mm, with dimensions of 1.5 x 1.2mm and a drilled hole diameter with tolerance of 2(+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement, and each potential has two solder pins. The part is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and Electrolytic Copper with tin plating for contacts. It weighs 53.2g and operates within a temperature range of -60 to +105°C. The product is RoHS compliant, packaged in boxes of 24 pieces, and has a country of origin of PL with a GTIN of 4055143862226 and a customs tariff number of 85369010000.