250-108 WAGO Terminal Blocks

WAGO 250-108 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 160V, rated impulse voltage (III/3) of 2.5kV, rated voltage (III/2) of 160V, rated impulse voltage (III/2) of 2.5kV, nominal voltage (II/2) of 320V, rated surge voltage (II/2) of 2.5kV, and a rated current of 8A. It has UL 1059 approval with rated voltages of 300V and rated currents of 5A for both Use Group B and D, and CSA approval with rated voltages of 300V and rated currents of 10A for both Use Group B and D. The part features 8 connection points, a single connection type, and one level, utilizing Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1mm2, and specifies a strip length of 8.5 to 9.5mm (0.33 to 0.37 inches). The conductor connection direction to PCB is 45 degrees, with a pole number of 8. Physical specifications include a pin spacing of 3.5mm (0.138 inches), width of 29.5mm (1.161 inches), height of 16.7mm (0.657 inches), height from the surface of 13.1mm (0.516 inches), depth of 12mm (0.472 inches), solder pin length of 3.4mm, solder pin dimensions of 0.4 x 0.75mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It does not support plugging without loss of pin spacing, features THT PCB contact, in-line solder pin arrangement, and one solder pin per potential. The part is gray, made from Polyamide (PA66) in material group I, with a flammability class per UL94 of V0, clamping spring material of copper alloy, tin contact plating, a fire load of 0.086MJ, and weighs 3.8g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging type with a country of origin of CH, GTIN of 4044918647465, and a customs tariff number of 85369010000.