236-741 WAGO Terminal Blocks

WAGO 236-741 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 250V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 24A. It has CSA approvals with rated voltages of 300V and rated currents of 15A for Use Group B and 10A for Use Group D. The part features a single connection point with CAGE CLAMP technology, operable with a tool, accommodating solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), including options for both insulated and uninsulated ferrules. The strip length for connection is 5 to 6mm (0.2 to 0.24 inches), and the conductor connection direction to PCB is at 45 degrees. It has a pin spacing of 5/5.08mm (0.197/0.2 inches), dimensions of 7.2mm width, 17mm height, 13mm height from the surface, and 14mm depth, with a solder pin length of 4mm and dimensions of 0.7 x 0.7mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm. It is designed for THT PCB contact with in-line solder pin arrangement and two solder pins per potential. The part is yellow, made from Polyamide (PA66) with a flammability class of UL94 V0, chrome-nickel spring steel (CrNi) for the clamping spring, electrolytic copper (ECu) for the contact material, and tin plating. It has a fire load of 0.013MJ and weighs 0.9g. The operating temperature range is -60 to +105°C. It is RoHS compliant without exemptions, packaged in boxes of 600 pieces (100 SPU), with a country of origin of CH, GTIN 4044918963114, and a customs tariff number of 85369010000.