236-612 WAGO Terminal Blocks

WAGO 236-612 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1, featuring nominal voltages of 630V (III/3) and 1000V (II/2, III/2), with rated impulse voltages of 8kV for both overvoltage categories III/2 and III/3. It has a rated current of 24A according to IEC/EN standards. Under UL 1059, it is rated for 300V and 15A for Use Group B, and similarly, 300V and 10A for Use Group D. CSA approvals mirror the UL ratings with 300V and 15A for Use Group B, and 300V and 10A for Use Group D. This connector has 12 connection points, supports a single connection type with one level, and utilizes CAGE CLAMP technology for connection, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1.5mm2. The recommended strip length is 5 to 6mm (0.2 to 0.24 inches), with a conductor connection direction to PCB at 45 degrees. It features a pole number of 12, pin spacing of 10/10.16mm (0.394/0.4 inches), and dimensions of 122.3mm in width, 17mm in height, 14mm in depth, with a height from the surface of 13mm. The solder pin length is 4mm, with dimensions of 0.7 x 0.7mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It is designed for THT PCB contact with in-line solder pin arrangement and two solder pins per potential. The connector is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) contacts plated with tin. It has a fire load of 0.292MJ and weighs 15.4g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemptions, and comes in boxes of 40 pieces with a country of origin of CH and a GTIN of 4044918773546.