234-203 WAGO Industrial Automation Components

WAGO 234-203 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards. It features nominal voltages of 63V (III/3), 160V (III/2), and 320V (II/2), with a rated impulse voltage of 2.5kV for all categories and a rated current of 6A. The part is UL 1059 approved, with a rated voltage and current for UL Use Group B at 150V and 4A, respectively, and similar ratings for CSA Use Group B. It offers three connection points, a single connection type with CAGE CLAMP technology, push-button actuation, and accommodates solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules at 0.25mm2. The strip length for connections is 5 to 6mm, with a conductor connection direction to PCB at 90 degrees and a pole number of 3. Physically, it has a pin spacing of 2.5mm, dimensions of 9.7mm in width, 18mm in height, 14mm height from the surface, and 14.4mm in depth, with solder pin length of 4mm and dimensions of 0.5 x 0.75mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm, featuring THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) contacts plated with tin. It has a fire load of 0.028MJ, weighs 1.6g, and operates within a temperature range of -60 to +105°C. Packaged in boxes of 520 pieces, it is RoHS compliant without exemptions, has a GTIN of 4044918651493, and a customs tariff number of 85369010000, with its country of origin being CH.