218-123 WAGO Industrial Automation Components

WAGO 218-123 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 80V (III/3), 160V (III/2), and 320V (II/2), with rated impulse voltages of 2.5kV for both III/2 and III/3, and a rated surge voltage of 2.5kV for II/2. The rated current is 6A according to IEC/EN standards, and it has UL 1059 and CSA approvals with rated voltages of 150V and rated currents of 4A for both UL and CSA in Use Group B. This part has 23 connection points and potentials, with a single connection type and level utilizing CAGE CLAMP technology and slider actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules at 0.25mm2. The part has a strip length of 5 to 6mm (0.2 to 0.24 inches) and a conductor connection direction to PCB at 40 degrees. It features a pin spacing of 2.5mm (0.098 inches), dimensions of 59mm width, 10.9mm height, 13mm depth, and a height from the surface of 8.1mm. The solder pin length is 2.8mm with dimensions of 0.5 x 0.75mm and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It does not support plugging without loss of pin spacing, has THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.371MJ, weighs 7.3g, and operates within a temperature range of -60 to +105°C. Packaged in boxes of 80 pieces (20 pieces per SPU), it is RoHS compliant without exemption, has a GTIN of 4017332998338, and a customs tariff number of 85369010000, with its country of origin being Poland.