218-105 WAGO Industrial Automation Components

WAGO 218-105 is an automation part designed for printed circuit connections, featuring a short circuit breaking rating as per IEC/EN 60664-1 standards. It operates at nominal voltages of 80V, 160V, and 320V with a rated impulse voltage of 2.5kV across different overvoltage categories and pollution degrees. The part is rated for a current of 6A according to IEC/EN standards, and 4A under UL and CSA standards for Use Group B, with respective rated voltages of 150V. It accommodates five connection points and potentials, utilizing a single connection type across one level with CAGE CLAMP technology and slider actuation. The connector supports solid and fine-stranded conductors ranging from 0.08 to 0.5mm2 (28 to 20 AWG), including specific accommodations for fine-stranded conductors with insulated or uninsulated ferrules at 0.25mm2. Notably, it allows for terminating 0.75mm2/18 AWG conductors under certain conditions. The part has a 5 to 6mm strip length, a conductor connection direction to PCB at 40 degrees, and a five-pole number. Physically, it has a pin spacing of 2.5mm, dimensions of 14mm in width, 10.9mm in height, 13mm in depth, and a solder pin length of 2.8mm. The drilled hole diameter accommodates 1.1mm (+0.1mm). It is made from Polyamide (PA66) in gray, with a flammability class of V0, and uses Chrome-Nickel spring steel and Electrolytic Copper with tin plating for its contacts. The part operates within a temperature range of -60 to +105°C, is RoHS compliant without exemptions, and comes in boxes of 500 pieces with a country of origin in Poland.