RSS16-SD-R-ST8H Schmersal Safety Switches

Product Details

• Interfering radiation
  IEC 61000-6-4
• EMC rating
  IEC 60947-3
• Current, Utilisation category DC13
  1 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  1 A
• Output current, (fail-safe output), maximum
  1 A
• Voltage drop Ud, maximum
  2 V
• Voltage, Utilisation category DC12
  24 VDC
• Rated operating voltage, maximum
  26.4 VDC
• Versions
  p-type
• Rated operating current (safety outputs)
  1,000 mA
• Current leakage Ir
  0.5 mA
• Switching frequency, approx.
  1 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Rated operating voltage, minimum
  20.4 VDC
• Degree of pollution to VDE 0100
  3
• Rated impulse withstand voltage Uimp
  0.8 kV
• Operating current
  150 mA
• No-load supply current I0
  100 mA
• Overvoltage category
  III
Voltage type
DC (direct current)
Protection rating
0
Rated insulation voltage Ui
32 VDC
Ambient temperature, maximum
+70 °C
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Restistance to shock
30 g / 11 ms
Degree of protection
IP65 to EN 60529, IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, minimum
-25 °C
Height of sensor
30 mm
Width of sensor
52 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Ensured switch distance ON Sao
5 mm
Length of sensor
91 mm
Ensured switch distance OFF Sar
30 mm
Switch distance
15 mm
Mounting
2 x M5, Cylinder head screw
Terminal Connector
Connector M12, 8-pole
Repeat accuracy R R
0.5 mm
Tightening torque of nuts, maximum
2 Nm
Hysteresis (Switch distance), maximum
2 mm
Number of semi-conductor outputs with signaling function
1
Number of fail-safe digital outputs
2
Number of Series-wiring of sensors
31
Number of LEDs
2
Actuating panels
front side, rear, from head
Safety functions
Yes
Cascadable
Yes
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Serial diagnostics
Yes
Diagnostic output
Yes
Short circuit detection
Yes
Duration of risk, maximum
200 ms
Short-circuit recognition
Yes
Latching
Yes
Active principle
RFID
Coding level according to ISO 14119
Low
general information
Universal coding
Reaction time, maximum
100 ms
Time to readiness, maximum
2,000 ms
Sensor topology
Sensor for series wiring
Gross weight
180 g
Housing construction form
Block
Installation conditions (mechanical)
not flush
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Active area
lateral, front side, cover-side
Standards
IEC 60947-5-3

Related documents RSS16-SD-R-ST8H Specs