MZM 100 B ST-AS REAP Schmersal Electronic Components

Product Details

• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Input module address
  0
• Operating current
  600 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Parameter bits, P3
  Device error (fault detected)
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P2
  Auxiliary voltage in
• AS-i Parameter bits, P0
  Actuator in
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Outputs, DO 3
  For the variable setting of the latching force
• AS-i Outputs, DO 2
  For the variable setting of the latching force
• AS-i Outputs, DO 1
  For the variable setting of the latching force
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i, ID-Code1
  0xF
• AS-i, ID-Code
  0xB
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• Note (AS-i Operating voltage)
  Protection against polarity reversal
AS-i Specification
Safety-Slave
AS-i Profile
S-7.B.F.E
AS-i Version
V 2.1
AS-i Current consumption, maximum
100 mA
AS-i, IO-Code
0x7
AS-i Operating voltage, minimum
26.5 VDC
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Protection rating
III
Note (Relative humidity)
non-condensing, non-icing
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated insulation voltage Ui
32 VDC
Relative humidity, maximum
95 %
Restistance to shock
30 g / 11 ms
Relative humidity, minimum
30 %
Ambient temperature, maximum
+55 °C
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
-25 °C
Height of sensor
179 mm
Degree of protection
IP67 to EN 60529
Length of sensor
40 mm
Width of sensor
40 mm
Latching force, minimum
30 N
Latching force, maximum
100 N
Clamping force, guaranteed
500 N
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Clamping force, typically
750 N
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Latching
Yes
Note (Mechanical lifetime)
Actuating speed < 0.5 m/s, Operations for door weights ≤ 5 kg
Safety functions
Yes
Actuator monitored
Yes
Standards
EN 62026-2, EN 60947-5-3, EN ISO 13849-1
Enclosure material
Glass-fibre, reinforced thermoplastic
Power to lock
Yes
Gross weight
605 g
Reaction time, maximum
150 ms
general information
Universal coding
Time to readiness, maximum
4,000 ms
Active principle
inductive
Duration of risk, maximum
150 ms
Coding level according to ISO 14119
Low

Related documents MZM 100 B ST-AS REAP Specs