AZM40Z-I1-ST-1P2P Schmersal Safety Switches

Product Details

• Current leakage Ir
  0.5 mA
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  2 V
• Voltage, Utilisation category DC13
  24 VDC
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Source
  C2
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Current consumption solenoid at switching moment, peak
  600 mA / 100ms
• Switching frequency, maximum
  0.3 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Note
  Cable length and cable section alter the voltage drop depending on the output current
• Operating current
  1,200 mA
• No-load supply current I0
  100 mA
• Rated operating voltage
  24 VDC - 15 % / + 10 % (stabilised PELV)
• Overvoltage category
  III
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Storage and transport temperature, maximum
+85 °C
Protection rating
III
Restistance to shock
30 g / 11 ms
Storage and transport temperature, minimum
-40 °C
Ambient temperature, maximum
+55 °C
Ambient temperature, minimum
+0 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Height of sensor
20 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Width of sensor
40 mm
Length of sensor
119.5 mm
Ensured switch distance OFF Sar
8 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Actuating speed, maximum
0.5 m/s
Clamping force in accordance with ISO14119 Fzh
2,000 N
Type of the fixing screws
2 x M5 (Counter sunk screw)
Latching force
40 N
Interlocking principle
bistable
Clamping force, maximum Fmax
2,600 N
Integral System Diagnostics, status
Yes
Mechanical life, minimum
200,000 Operations
Number of safety contacts
2
Safety functions
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Guard locking monitored
Yes
Short circuit detection
Yes
Manual release
Yes
Latching
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Duration of risk, maximum
200 ms
general information
Individual coding
Time to readiness, maximum
4,000 ms
Gross weight
270 g
Coding level according to ISO 14119
High
Active principle
RFID
Enclosure material
Glass-fibre, reinforced thermoplastic and light-alloy diecast
Reaction time, maximum
100 ms
Standards
IEC 61508, EN 60947-5-3, EN ISO 13849-1

AZM40Z-I1-ST-1P2P Related Documents