AZM400Z-ST2-I2-2P2P-T-E Schmersal Safety Accessories

Product Details

• Note
  The diagnostic output are not safety relevant outputs!
• Versions
  short-circuit proof, p-type
• Voltage, Utilisation category DC13
  24 VDC
• Classification ZVEI CB24I, Sink
  C1, C2
• Rated operating current (safety outputs)
  250 mA
• Voltage drop Ud, maximum
  2 V
• Allowable discrepancy time (input), maximum
  10 s
• Current, Utilisation category DC12
  0.05 A
• Classification ZVEI CB24I, Source
  C2
• Rated operating voltage
  24 VDC
• Electronic manual release
  Yes
• Short circuit detection
  Yes
• Gross weight
  774 g
• Reaction time, maximum
  100 ms
• Enclosure material
  Light alloy die-casting
• Time to readiness, maximum
  1,500 ms
• Guard locking monitored
  Yes
• Active principle
  Magnetic field, RFID
• Coding level according to ISO 14119
  High
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
general information
Individual coding, multiple teaching
Current, Utilisation category DC13
0.05 A
Voltage, Utilisation category DC12
24 VDC
Current leakage Ir
1.5 mA
Minimal average cycle time (with continuous operation)
20 s
Switching thresholds of the control inputs
−3 V … 5 V (Low), 15 V … 30 V (High)
Open / close cycle (Motor), minimum
3
Switching frequency, approx.
0.3 Hz
Required rated short-circuit current to EN 60947-5-1
100 A
Operating current
50 mA
No-load supply current I0
100 mA
Current consumption at 24V, minimum
10 mA
Current consumption at 24V, maximum
15 mA
Current consumption, maximum
600 mA
Operating Current
100 mA
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Ambient temperature, maximum
+55 °C
Storage and transport temperature, minimum
-40 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, minimum
-20 °C
Width of sensor
77.8 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Length of sensor
65.3 mm
Tightening torque of the screw
8 Nm
Terminal Connector
2 connector M12, 8 and 5 pin
Height of sensor
166.7 mm
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Clamping force in accordance with ISO14119 Fzh
10,000 N
Lateral force at bolt return, maximal (against locked door)
300 N
Clamping force, maximum Fmax
13,000 N
Minimum distance devices
30 mm
Note (Mechanical lifetime)
Which have a lateral force Ftrans = 100 N: 100.000 operations
Mechanical life, minimum
1,000,000 Operations
Interlocking principle
bistable
Number of diagnostic signals
2
Integral System Diagnostics, status
Yes
Safety functions
Yes
Number of safety contacts
2
Short-circuit recognition
Yes
Emergency exit
Yes

Related documents AZM400Z-ST2-I2-2P2P-T-E Specs