AZM 161 B ST1-AS RP Schmersal Safety Switch Interlocks
Part#:AZM 161 B ST1-AS RP
Alt. Part#:101209095
Manufacturer:Schmersal
Category:Safety Switch Interlocks
Product Lifecycle:Active
Product description
AS interface safety at work; Safety switchgear; Solenoid supply 24 VDC (Aux); Actuator monitored; Manual release; Solenoid interlock; Thermoplastic enclosure; High holding force 2000; 130 mm x 90 mm x 30 mm; Interlock with protection against incorrect loc
Product Details
- Note (AS-i Input module address) Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
- Rated operating voltage 24 VDC -15% / +10% (stabilised PELV)
- Operating current 500 mA
- AS-i Parameter bits, P1 Solenoid interlock locked
- AS-i Parameter bits, P3 Error message - locking/unlocking of the solenoid interlock blocked
- Note (AS-i Parameter bits) Set the parameter outputs to "1111" (0xF), FID: periphery error
- AS-i Parameter bits, P2 Magnet voltage in tolerance range
- AS-i Outputs, DO 3 No Function
- AS-i Input module address 0
- AS-i Outputs, DO 2 No Function
- AS-i Outputs, DO 1 No Function
- AS-i Parameter bits, P0 Actuator detected
- AS-i Outputs, DO 0 Solenoid control
- AS-i Input, Channel 1 Data bits DI 0 / DI 1 = dynamic code transmission
- AS-i Input, Channel 2 Data bits DI 2 / DI 3 = dynamic code transmission
- AS-i, ID-Code2 0xE
- AS-i, ID-Code1 0xF
- AS-i, ID-Code 0xB
- AS-i Version V 2.1
- AS-i Profile S-7.B.F.E
- AS-i, IO-Code 0x7
- AS-i Operating voltage AS-i maximum 31.6 VDC
- AS-i Current consumption, maximum 100 mA
- Note (AS-i Operating voltage) Protection against polarity reversal
- AS-i Specification Safety-Slave
- Switching frequency 1,000 /h
- AS-i Operating voltage, minimum 26.5 VDC
- Degree of pollution to VDE 0100 3
- Overvoltage category III
- Rated insulation voltage Ui 32 VDC
- Rated impulse withstand voltage Uimp 0.8 kV
- Restistance to shock 30 g / 11 ms
- Note (Relative humidity) non-condensing, non-icing
- Resistance to vibrations to EN 60068-2-6 10 Hz ... 150 Hz, amplitude 0.35 mm
- Relative humidity, minimum 30 %
- Relative humidity, maximum 95 %
- Protection rating II
- Storage and transport temperature, maximum +85 °C
- Degree of protection IP67 to EN 60529
- Storage and transport temperature, minimum -25 °C
- Ambient temperature, maximum +60 °C
- Width of sensor 130 mm
- Height of sensor 90 mm
- Ambient temperature, minimum -25 °C
- Length of sensor 30 mm
- Connector position Bottom
- Integral System Diagnostics, status Yes
- Standards IEC 61508, EN 60947-5-1, EN 62026-2
- Actuating speed, maximum 2 m/s
- Gross weight 450 g
- Terminal Connector Connector plug M12, 4-pole, (A-coding)
- Actuating play in direction of actuation 5.5 mm
- Clamping force 2,000 N
- Mechanical life, minimum 1,000,000 Operations
- Latching force 30 N
- Manual release Yes
- Reaction time, maximum 100 ms
- Actuator monitored Yes
- Enclosure material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Power to unlock Yes
- Number of actuating directions 3
- Active principle electromechanical
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
AZM 161 B ST1-AS RP Related Documents
Similar products from: Schmersal Safety Switch Interlocks
Manufacturer warranty
AZM 161 B ST1-AS RP Schmersal
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare AZM 161 B ST1-AS RP with other Safety Switch Interlocks products
Note (AS-i Input module a...
Rated operating voltage
Operating current
AS-i Parameter bits, P1
AS-i Parameter bits, P3
Note (AS-i Parameter bit...
AS-i Parameter bits, P2
AS-i Outputs, DO 3
AS-i Input module address
AS-i Outputs, DO 2
Selected product
AZM 161 B ST1-AS RP
Schmersal
AS interface safety at work; Safety switchgear; Solenoid supply 24 VDC (Aux); Actuator monitored; Ma...
Note (AS-i Input module address)Preset to address 0, can be ...
Rated operating voltage24 VDC -15% / +10% (stabilis...
Operating current500 mA
AS-i Parameter bits, P1Solenoid interlock locked
AS-i Parameter bits, P3Error message - locking/unlo...
Note (AS-i Parameter bits)Set the parameter outputs to...
AS-i Parameter bits, P2Magnet voltage in tolerance ...
AS-i Outputs, DO 3No Function
AS-i Input module address0
AS-i Outputs, DO 2No Function
Note (AS-i Input module address)-
Rated operating voltage-
Operating current-
AS-i Parameter bits, P1-
AS-i Parameter bits, P3-
Note (AS-i Parameter bits)-
AS-i Parameter bits, P2-
AS-i Outputs, DO 3-
AS-i Input module address-
AS-i Outputs, DO 2-
Note (AS-i Input module address)-
Rated operating voltage-
Operating current-
AS-i Parameter bits, P1-
AS-i Parameter bits, P3-
Note (AS-i Parameter bits)-
AS-i Parameter bits, P2-
AS-i Outputs, DO 3-
AS-i Input module address-
AS-i Outputs, DO 2-
About the manufacturer
MQ Automation is an authorized Schmersal distributor, bringing you the highest quality industrial safety and automation products. As a leading manufacturer in the sector, Schmersal specializes in developing innovative safety systems that are crucial for ensuring the protection of employees and machinery in industrial environments. At MQ Automation, we understand the importance of safety in automat...
FAQ
Out if stock but available for backorder.
AS interface safety at work; Safety switchgear; Solenoid supply 24 VDC (Aux); Actuator monitored; Manual release; Solenoid interlock; Thermoplastic enclosure; High holding force 2000; 130 mm x 90 mm x 30 mm; Interlock with protection against incorrect loc
Similar products from: Safety Switch Interlocks
What can I help you find today?
