AES 1135 Schmersal Electronic Components

Product Details

• Switching capacity, maximum
  24 VDC
• Input signal, LOW Signal 0
  0 … 2 VDC
• Switching capacity, minimum
  10 mA
• EMC rating
  EMC-Directive
• Current, Utilisation category DC12
  0.1 A
• Conduction resistance, maximum
  40 Ω
• Voltage, Utilisation category DC12
  24 VDC
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Current, Utilisation category DC13
  6 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category AC-15
  6 A
• Voltage, Utilisation category AC15
  230 VAC
• Pull-in delay at RESET, typically
  20 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Drop-out delay in case of emergency, typically
  20 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Contact resistance, maximum
  0.1 Ω
• Note (Contact resistance)
  in new state
• Electrical power consumption
  5 W
• Rated control voltage at DC, maximum
  28.8 VDC
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated AC voltage for controls at DC minimum
20.4 VDC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Frequency range
50 Hz, 60 Hz
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Thermal test current
6 A
Degree of pollution to IEC/EN 60664-1
2
Overvoltage category
III
Rated impulse withstand voltage Uimp
4 kV
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+70 °C
Degree of protection of the mounting space
IP54
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Ambient temperature, maximum
+55 °C
Storage and transport temperature, minimum
-25 °C
Degree of protection of clips or terminals
IP20
Ambient temperature, minimum
+0 °C
Degree of protection of the enclosure
IP40
Depth
121 mm
Tightening torque of Clips
0.6 Nm
Height
100 mm
Cable section, minimum
0.25 mm²
Cable section, maximum
2.5 mm²
Width
22.5 mm
Mounting
Snaps onto standard DIN rail to EN 60715
Terminal designations
IEC/EN 60947-1
Terminal Connector
Screw connection, rigid or flexible
Mechanical life, minimum
20,000,000 Operations
Number of openers
2
Number of signalling outputs
2
Number of safety contacts
1
Number of shutters
1
Number of undelayed semi-conductor outputs with signaling function
2
Number of LEDs
1
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Integral System Diagnostics, status
Yes
Earth connection detection
Yes
Reset after disconnection of supply voltage
Yes
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Wire breakage detection
Yes
Stop-Category
0
Automatic reset function
Yes
Short-circuit recognition
Yes
Gross weight
155 g
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated

Related documents AES 1135 Specs